Buy Quality Dangerous Goods Cabinets Australia from the Most Renowned Dealer

Improper storage of dangerous chemicals is the main cause behind industrial fires. One easy way to curtail fire risks is to install dangerous goods cabinets Australia. These cabinets keep them safe, no matter what the condition outside is like, the flammables inside remain unaltered. Why one must exercise more caution when storing flammable liquids? Flammables are not going to burn in their liquid state but at room temperature average atmospheric pressure they release vapors in sufficient concentration that can ignite easily given an ignition source. Also, these liquids generally have a flash point below room temperature and boil at very low temperatures.

According to safety regulations, such liquids must be contained inside safety cans. If your facility stores more than 25 gallons of flammable liquid, all liquid combined then it must be stored in flammable cabinets. These are specially constructed with appropriate materials and are designed to be very visible and easily identifiable. All such cabinets are liquid tight with raised lip around the base to contain the spills and leaks if any, fire resistant so that no matter what the contents inside stay as it is.

A fire safety cabinet made for flammables is different from the ones made for acids and corrosives and ones that store paints and inks. Cabinets can be made of metal, polyethylene or wood. What matters is that each cabinet must be certified by the relevant authorities like the OSHA, NFPA or FPAA. You can be sure of the quality only of you purchase from reputable dealers. The most common of these cabinets are the steel ones with at least 18 gauge double-walled doors, sides, top and bottom along with 1 ½ inches of air space between the walls.        If they have vents it must have 2” threaded fittings, fire baffles and caps. They should also have a 2“ raised leak-proof door seal and have a high glass powder finish in safety yellow with red warning labels.

If you are wondering where you buy dangerous goods cabinets in Australia that will check all the required boxes? S.E.P.M.A.R. is one of the leading names in the industry. They supply safety cabinets; provide scheduled service maintenance. If you want to get in touch with them, visit their website http://www.sepmar.com.au/.

Where to Find Quality Dangerous Goods Cabinets in Australia

It takes less than 3 minutes for fire to spread and take a dangerous form. In industrial workplace, it takes even less than a minute for it to create havoc. News of massive industrial fires and destroying lives and property are not unheard of. Improper storage and handling is the main reason behind such incidents. One easy step to avoid this is to install dangerous goods cabinets Australia. These are specifically made for storing hazardous chemicals and other such substances and avoid accidents.

There are several types of storage cabinets available for you to choose from. So you must have knowledge of all that your facility houses. That will enable you to decide among metal, wooden, polyethylene cabinets.

Corrosives and acids must be stored in stainless steel cabinets, which are considered to be the best for such chemicals. They are made of at least 18 gauge iron sheets and come with double walls with at least an inch of air space in between. The doors feature 3 point lock as well as welded joints. The vents must only be located at the bottom and directs to the outside. Each and every fire safety cabinet must be purchased from a certified dealer.

Wooden safety cabinets on the other hand are constructed using 1 inch high grade plywood which will not break or delaminate in case of fire the joints are fastened and riveted from both directions using flathead screws.

All cabinets are color coded so for one to know what it contains. Red for flammables, yellow for combustibles, green for pesticides and blue and corrosives and acids- this is followed universally. This makes them easy to spot. It also increases efficiency- one knows exactly where to look for a required chemical and not waste time looking for it in every storage cabinet.

One thing however must be kept in mind- these dangerous goods cabinets Australia must only be purchased from authorized and certified dealers like S.E.P.M.A.R. It is a Western Australian owned and operated company, established in 1995.They specialize in the manufacture, supply, installation, repair and scheduled maintenance of safety storage cabinets, emergency deluge safety showers also eye/face wash stations, and more.

A Fire Safety Cabinet Helps In Making Work Place a Safer Place to Be

If you work in a facility where a large amount of hazardous chemicals is stored, you need to take precautions. A fire safety cabinet will help you make the place more secure and safe not just for you but for the others as well.  Working with chemicals and dangerous substances may seem to be apparently cool but it will be cooler if you take safety precautions as a responsible professional. Fire is the greatest threat to your facility. And news about how an industrial fire has broken out and caused huge loss of life and property is rampant.

All chemicals are not equally potent but how you deal with them. They must be kept in a designated place, away from the main work place. Some chemicals and liquids when in contact with oxygen or other chemicals become more lethal. So it is best to stay extra cautious around these.

It’s not hard to store these chemicals safely- all it takes are a few dangerous goods cabinets Australia made- the finest of the lot that will create a barrier and stop the chemicals from escaping and putting your employees in harm’s way.

But the trick is to get the right kind of cabinet according to your needs. And if you buy from reputable vendors like SEPMAR, they will guide you with the same. There are different types of them made for different types of liquids- some has to be kept apart- away from everything else-if it comes in touch with another; it will be pose a threat. Some need cabinets made of stainless steel while corrosives cannot be kept in metal containers.

 And so that it is easier to distinguish one from another, these come color coded. They come in capacity storage of 30, 45, 60 and 90 Galleons but the manufacturers often customize your order according to your need for a fire safety cabinet.  Needs vary so you will have to know what exactly you need for your facility.  Each and every such cabinet must be approved by the respective authorized agencies. This may seem like a small step but it is a significant one in making your workplace a much safer place to be.

Hazardous Storage Cabinet Provides Safety from Harmful Substances

Hazardous storage cabinet is required for proper safety in the work place. It must comply with AS 1940:2007. It has a sloped roof with 75mm overhang and drainage guttering to protect front doors. They have forklift channels for easy transportation, inclusive of bolt down bracket once stationed, two doors closing, three point locking system, supplied keyed to lock. It is a safe storage for acid and alkaline corrosives. It has fully adjustable leveling feet. It has 40mm air pocket between internal and external walls to protect against fire. It has polyethylene spill collection trays on each shelf which protects against spills and leaks. They have a stainless steel construction for strength and reliability, high capacity stumps for liquid containers, compliant with the Australian standards respectively on a whole.

These protect the contents from damage, provide segregation between incompatible materials and contains small spills. It must be secured around the main cylinder body to prevent them from falling and the smallest volume compatible with the operation of the facility. The size of this cabinet should be limited to 2.5 l for dangerous goods and 5 kg for hazardous substances.

Dangerous goods cabinets Australia protects workers, reduce fire risks and improve productivity. It has anti-flash vents fitted for exterior fume extraction. It has self closing doors-fully signed, 3 shelves adjustable, spare shelves available-fully locked. It has the following features which are -it complies with as1940-2004, 3oolitres maximum capacity, holds 12-15*20 litre drums, external size: 1760*870*870, internal size: 1650*785*785, it is supplied with three shelves as standard, extra shelves may be added.

Dangerous cabinets, Australia have a flawless powder coated finish, inner and outer skin surface are made from 1.2mm corrosion resistant steel, 1.6mm galvanized steel shelves, 150mm liquid tight slump, tested and proved inbuilt flame arrester, continuous stainless steel piano hinges, adjustable feet for uneven surfaces, recessed lockable handle with grit-grip, complete with compliant safety signs, dual ventilation ports, sequentially closing doors. They have recessed handle with key lock to eliminate potential damage from heavy knocks. It is constructed using 1.2mm thick double steel walls with 40mm air gap between walls to produce thermal insulation. It comes in different capacities like-250, 450, 650, 850 litres with heavy duty. It is available in both steel and polyethylene construction, suitable for internal storage of flammable liquids, corrosives, poisons, organic peroxides, oxidizing agents and various dangerous goods. Lastly, each vent is supplied with resealable metal caps for safety.

Are Your Fire Safety Cabinets Tamperproof

A fire safety cabinet is becoming a huge help for the firefighters around the world. It keeps the facility and the staff working in it safe. If your facility stores hazardous chemicals, you should immediately consider getting fire proof storage cabinets.

 Designed to meet the standards of OSHA AND NFPA standards, these are made of sturdy 18-inch gauge double wall, welded steel with 1.5’’ of insulating air space for fire resistance. The approval and regulation of these cabinets are highlighted as-

Approval/Listing and Regulation Key

• FM – Factory Mutual tested and approved
• UL – Underwriters Laboratories listed
• N – Designed in accordance with National Fire Protection Association (NFPA) code 30 regulation
• O – Complies with OSHA regulations
• U- Complies with Uniform Fire Co

The type of chemical to be stored is standardized in the safety cabinet industry. Using color and labeling in your storage practices helps identify, organize, and segregate liquids.  This just helps one to identify the more dangerous ones from the rest and be extra cautious around them.

Whether it is called a chemical, hazchem or dangerous goods it does not matter, what really matters is it must be built in accordance with the relevant Australian Standard for the chemical being stored in it. The dangerous goods storage cabinets Australia  manufactured by SEPMAR are in complete accordance with these standards and are built to highest quality standards in the industry. The diamond symbol on the container you wish to store must match the symbol on the dangerous goods cabinet.

SEPMAR’s fire safety cabinets are constructed in accordance with Australian Standards 1940-2004. All come complete with emergency escape handle, extinguisher and spill absorption kit where applicable. They are ready for immediate use upon delivery. The storage of any dangerous goods or chemical storage in the workplace and their transportation is tightly regulated throughout Australia. SEPMAR’s premium range of chemical or hazchem storage cabinets, dangerous goods chemical stores and dangerous goods handling equipment meets and exceeds Standards Australia’s AS 1940 – 2004. Laws and legislation surrounding the management of dangerous goods in the workplace are both extensive and complex.

Prevent a Disaster with a Fire Safety Cabinet

If in your facility there are corrosives, inks, paints, pesticides and other hazardous chemicals, safety should be your prime concern. Proper storage will ensure that you and your staff and your facility are safe. Improper storage and handling of flammable liquids is the leading cause of industrial fires. As a responsible person, you should ensure that safety of all in the facility is not compromised. The easiest way to do so is to storing it in fire safety cabinet containers.

How do you determine the characteristics and recommended storage practices of these chemicals? Review the MSDS (Material Safety Data Sheet), here you will find a detailed analysis of what is required. Corrosives must be stored in a particular way. Inks and pesticides also need to be kept properly. There are also other hazardous materials that will need extra precaution.

Steel safety cabinets come with a built in grounding lug, which is generally located at the bottom right side. It is important to ground flammable or combustible liquids. Cabinets come in different sizes that will fit different sized containers. If you are handling acids and corrosives, you will need to handle it with extra care. So even if it spills the container will withstand the substance.

With proper storage of chemicals, you also can avoid theft and liability issues. Any unauthorized personnel cannot manhandle these dangerous chemicals and put lives and property in danger.  Dangerous goods cabinets Australia is manufactured in accordance to the OSHA standards so as to ensure their quality and durability.  Always shop with a reputable vendor; this will help you choose the right cabinet for your situation.

Quality construction is the key. Storage cabinets are made out of high quality steel or poly cabinets. There are also double-walled doors as well as sides, tops and bottoms. Also check for leak proof seals. The bottom line is safety. Check for third-party certification like FM Global (FM approved) or Underwriters Laboratories (UL listed).  Proper storage of these harmful chemicals will make your facility safe and secure a great place for you and your staff to work in.