Buy Quality Dangerous Goods Cabinets Australia from the Most Renowned Dealer

Improper storage of dangerous chemicals is the main cause behind industrial fires. One easy way to curtail fire risks is to install dangerous goods cabinets Australia. These cabinets keep them safe, no matter what the condition outside is like, the flammables inside remain unaltered. Why one must exercise more caution when storing flammable liquids? Flammables are not going to burn in their liquid state but at room temperature average atmospheric pressure they release vapors in sufficient concentration that can ignite easily given an ignition source. Also, these liquids generally have a flash point below room temperature and boil at very low temperatures.

According to safety regulations, such liquids must be contained inside safety cans. If your facility stores more than 25 gallons of flammable liquid, all liquid combined then it must be stored in flammable cabinets. These are specially constructed with appropriate materials and are designed to be very visible and easily identifiable. All such cabinets are liquid tight with raised lip around the base to contain the spills and leaks if any, fire resistant so that no matter what the contents inside stay as it is.

A fire safety cabinet made for flammables is different from the ones made for acids and corrosives and ones that store paints and inks. Cabinets can be made of metal, polyethylene or wood. What matters is that each cabinet must be certified by the relevant authorities like the OSHA, NFPA or FPAA. You can be sure of the quality only of you purchase from reputable dealers. The most common of these cabinets are the steel ones with at least 18 gauge double-walled doors, sides, top and bottom along with 1 ½ inches of air space between the walls.        If they have vents it must have 2” threaded fittings, fire baffles and caps. They should also have a 2“ raised leak-proof door seal and have a high glass powder finish in safety yellow with red warning labels.

If you are wondering where you buy dangerous goods cabinets in Australia that will check all the required boxes? S.E.P.M.A.R. is one of the leading names in the industry. They supply safety cabinets; provide scheduled service maintenance. If you want to get in touch with them, visit their website http://www.sepmar.com.au/.

Fire Storage Cabinets Are Imperative For Your Safety

If your facility houses large amount of chemicals and hazardous liquids, you must consider getting fire storage cabinets; it is the first step to safety. The most common cause behind industrial fires is improper storage and handling of dangerous goods. A small naked flame may still be contained but if it comes in contact with any flammable or corrosives, or combustible liquids, the fire could take an ugly shape that might cause massive loss to lives and property. Yes, chemicals come in their own containers but that is not safe enough. They need to be stored in designated cabinets only that have been authorized by the respective fire protection authorities.

When you are buying a safety storage cabinet you need to take into consideration what kind of a chemical you are going to store in that- flammable liquids or corrosives, pesticides, combustibles or waste? There are cabinets specially made for flammables like ink or paints, corrosives, pesticides and so on. These come in different sizes to suit your storage needs. However it is to be kept in mind acids and corrosives require extra precautions.

A fire safety cabinet must always be purchased from certified dealers. It must be certified and must conform to the local and international fire safety standards. That is why buying from dealers like S.E.P.M.A.R. is a good idea. A reputable vendor specializing in industrial safety equipment will also help you choose the right kind of storage containers.

Look for quality construction; that is the first criteria to insist upon. Most safety cabinets are made from high quality stainless steel. But corrosives and some other substances need polyethylene cabinets because they eat right through the steel. You must also look for double-walled doors as well as sides, bottoms and tops. 3 point lock doors and vents with fire baffle and leak-proof seals are of course important too. Some cabinets come with legs- which are great if you have moisture on the floor or if they have to be placed near vents or outlets, these can be easily moved with a forklift.

Fire storage cabinets may apparently seem to be an extra expenditure, but it is imperative for the safety of not just you but your entire facility and products stored in it.

Where to Find Quality Dangerous Goods Cabinets in Australia

It takes less than 3 minutes for fire to spread and take a dangerous form. In industrial workplace, it takes even less than a minute for it to create havoc. News of massive industrial fires and destroying lives and property are not unheard of. Improper storage and handling is the main reason behind such incidents. One easy step to avoid this is to install dangerous goods cabinets Australia. These are specifically made for storing hazardous chemicals and other such substances and avoid accidents.

There are several types of storage cabinets available for you to choose from. So you must have knowledge of all that your facility houses. That will enable you to decide among metal, wooden, polyethylene cabinets.

Corrosives and acids must be stored in stainless steel cabinets, which are considered to be the best for such chemicals. They are made of at least 18 gauge iron sheets and come with double walls with at least an inch of air space in between. The doors feature 3 point lock as well as welded joints. The vents must only be located at the bottom and directs to the outside. Each and every fire safety cabinet must be purchased from a certified dealer.

Wooden safety cabinets on the other hand are constructed using 1 inch high grade plywood which will not break or delaminate in case of fire the joints are fastened and riveted from both directions using flathead screws.

All cabinets are color coded so for one to know what it contains. Red for flammables, yellow for combustibles, green for pesticides and blue and corrosives and acids- this is followed universally. This makes them easy to spot. It also increases efficiency- one knows exactly where to look for a required chemical and not waste time looking for it in every storage cabinet.

One thing however must be kept in mind- these dangerous goods cabinets Australia must only be purchased from authorized and certified dealers like S.E.P.M.A.R. It is a Western Australian owned and operated company, established in 1995.They specialize in the manufacture, supply, installation, repair and scheduled maintenance of safety storage cabinets, emergency deluge safety showers also eye/face wash stations, and more.

The Correct way to Store Flammable Liquids in Fire Storage Cabinets

If you work in a chemical facility, it is important to know the importance of storing them properly. Flammables, acids and corrosives, paints and inks, and pesticides need are hazardous chemicals that need special attention. Not all of them are equally lethal. They won’t also combust on their own, but improper handling and storage might lead them to come in contact with either air or an ignition source or another substance, chemically react and lead to an explosion. Installing fire storage cabinets ensures that none of the above happens.

One of the main reasons behind industrial fires is improper storage of flammable liquids. It not just costs lives and billions of dollars for facility losses alone, it also harms the environment. Ideally when not in use, flammable liquids must be stored in designated cabinets inside storage rooms. These cabinets must be fire resistant, liquid tight, have self closing doors, 4” sills and a ventilation system that changes the air minimum of six times per hour. They must also be fitted with a lock and have fire protection in case of spillage.

If you have to use gas cylinders, they must always be stored in an upright position. This also prevents unauthorized personnel from handling them. If the quantities of your chemicals do not justify a storage room, then you must store them in FPAA or OSHA and NFPA certified cabinets. When you are buying a fire safety cabinet, make sure it meets the necessary requirements.

These cabinets are color coded for you to distinguish them from one another. Yellow is for flammables, red is for combustibles, blue for acids and corrosives and green for pesticides. Each must be boldly labeled on the front what kind of ingredient is stored inside. From 2 to hundreds of gallons, these are available in various sizes. You can buy them from www.sepmar.com.au

S.E.P.M.A.R. has been in the industry for the past nineteen years. Located in Perth, it specializes in the manufacture, supply, installation, repair and scheduled maintenance of safety fire storage cabinets; emergency deluge safety showers also eye/face wash stations, and more.

Understanding Fire Storage Cabinets

Flammable liquids must always be stored properly- in fire storage cabinets so as to prevent any unwanted accidents in the workplace. If you work with dangerous chemicals on a day to day basis in a factory or manufacturing unit, safety should be your first priority. News of industrial fires is not uncommon and the most common cause of such accidents is improper storage of the dangerous chemicals. Read on to know more about proper storage.

Dangerous liquids and chemicals can be anything between paints and inks, corrosives, flammable liquids, pesticides and so on. Not all of them are as lethal but when they come in contact with air or some other liquid, they might explode. These must be stored separately in dedicated containers. Then again, for acids and corrosives, special containers are required- made of steel.

Metal cabinets are considered to be the best in preventing damage to properties and injuries. These are made of 18 gauge iron sheets and have double walls with at least an inch of air space in between.  The 3 point lock door along with riveted and welded joints makes them more secure and sturdy. Venting is also advisable for all these cabinets but they should only be located at the bottom and direct outside. A wooden fire safety cabinet is constructed using 1 inch high grade plywood. These do not delaminate or break easily in case of fire. Flathead screws are used to fasten and rebate the joints of wooden cabinets from both sides.

Both metal and wooden cabinets need to pass a fire test. This test is conducted for 10 minutes and the internal temperature of the cabinets must not exceed 325° F. All the seals must remain tight and doors secure.

All such cabinets come in various capacities, according to your need. But for Class I and Class II chemicals, no more than 60 gallons are permitted. For Class III chemicals on the other hand, up to 60 gallons are allowed. Fire storage cabinets must always be purchased from authorized dealers and suppliers, which conform to the standard safety requirements, like S.E.P.M.A.R- a name you can trust.

A Fire Safety Cabinet Helps In Making Work Place a Safer Place to Be

If you work in a facility where a large amount of hazardous chemicals is stored, you need to take precautions. A fire safety cabinet will help you make the place more secure and safe not just for you but for the others as well.  Working with chemicals and dangerous substances may seem to be apparently cool but it will be cooler if you take safety precautions as a responsible professional. Fire is the greatest threat to your facility. And news about how an industrial fire has broken out and caused huge loss of life and property is rampant.

All chemicals are not equally potent but how you deal with them. They must be kept in a designated place, away from the main work place. Some chemicals and liquids when in contact with oxygen or other chemicals become more lethal. So it is best to stay extra cautious around these.

It’s not hard to store these chemicals safely- all it takes are a few dangerous goods cabinets Australia made- the finest of the lot that will create a barrier and stop the chemicals from escaping and putting your employees in harm’s way.

But the trick is to get the right kind of cabinet according to your needs. And if you buy from reputable vendors like SEPMAR, they will guide you with the same. There are different types of them made for different types of liquids- some has to be kept apart- away from everything else-if it comes in touch with another; it will be pose a threat. Some need cabinets made of stainless steel while corrosives cannot be kept in metal containers.

 And so that it is easier to distinguish one from another, these come color coded. They come in capacity storage of 30, 45, 60 and 90 Galleons but the manufacturers often customize your order according to your need for a fire safety cabinet.  Needs vary so you will have to know what exactly you need for your facility.  Each and every such cabinet must be approved by the respective authorized agencies. This may seem like a small step but it is a significant one in making your workplace a much safer place to be.

Dangerous Goods Cabinets Can Save your Life

Dangerous goods cabinets protect workers, reduce fire risks and improve productivity. These cabinets have anti-flash vents fitted for exterior fume extraction. It has self closing doors; fully signed-3 shelves adjustable, spare shelves available-fully lockable. They have the following features which include maximum capacity of 300 liters, external size: 1760*870*870mm, internal size:1650*785*785, and it holds 12-15*20 litre drums for not letting the fire to ignite at the work area.These cabinets have recessed handle with key lock to eliminate potential damage from heavy knocks. It is constructed using 1.2mm thick, double steel walls with 40mm air gap between walls to produce thermal insulation.

Dangerous goods cabinets have a lot of features which have been approved by OSHA and NPPA standards. The features include the flawless powder coated finish, 1.6mm galvanized steel shelves, 150mm liquid tight slump, tested and proved inbuilt  flame arrester, continuous stainless piano hinges, adjustable feet for uneven surfaces, complete with compliant safety signs, dual ventilation ports, sequentially closing doors. It has a inner and outer skin surface made from 1.2mm corrosion resistant steel. They are suitable for internal storage of flammable liquids, corrosives, poisons, organic peroxides, oxidizing agents and various other dangerous goods. These cabinets have a baked enamel finish for extra durability in the long run.

Hazardous storage cabinets complies with AS 1940:2007.It has a sloped roof with 75mm overhang and drainage guttering to protect front doors, Forklift channels for easy transportation, Inclusive of bolt down bracket once stationed, Two doors self closing, Three point locking system and supplied keyed to lock.The cabinets are safe storage for acid and alkaline corrosives.It has fully adjustable leveling feet.They have 40mm air pocket between internal and external walls to protect against fire. It has polyethylene spill collection trays on each shelf which protects against spills and leaks. They have a stainless steel construction for strength and reliability.

Hazardous storage cabinets protects the contents from damage, provides segregation between incompatible materials and it contains small spills.They are secured around the main cylinder body to prevent them from falling and the smallest volume compatible with the operation of the facility. Other relevant Australian standards particularly for hazardous storage cabinets include:AS 60079 for explosive atmospheres, AS 2243 for safety in laboratories, AS/NZS 3833 for storage and handling of mixed classes of dangerous goods in intermediate bulk container, AS 1692:Steel tanks for flammable and combustible liquids, AS 4897:Operation of underground and petroleum storage systems and AS 4976:Removal and disposal of underground petroleum storage tanks. Thus, the size of these cabinets is limited to 2.5litres for dangerous goods and 5kg for hazardous substances.

Prevent a Disaster with a Fire Safety Cabinet

If in your facility there are corrosives, inks, paints, pesticides and other hazardous chemicals, safety should be your prime concern. Proper storage will ensure that you and your staff and your facility are safe. Improper storage and handling of flammable liquids is the leading cause of industrial fires. As a responsible person, you should ensure that safety of all in the facility is not compromised. The easiest way to do so is to storing it in fire safety cabinet containers.

How do you determine the characteristics and recommended storage practices of these chemicals? Review the MSDS (Material Safety Data Sheet), here you will find a detailed analysis of what is required. Corrosives must be stored in a particular way. Inks and pesticides also need to be kept properly. There are also other hazardous materials that will need extra precaution.

Steel safety cabinets come with a built in grounding lug, which is generally located at the bottom right side. It is important to ground flammable or combustible liquids. Cabinets come in different sizes that will fit different sized containers. If you are handling acids and corrosives, you will need to handle it with extra care. So even if it spills the container will withstand the substance.

With proper storage of chemicals, you also can avoid theft and liability issues. Any unauthorized personnel cannot manhandle these dangerous chemicals and put lives and property in danger.  Dangerous goods cabinets Australia is manufactured in accordance to the OSHA standards so as to ensure their quality and durability.  Always shop with a reputable vendor; this will help you choose the right cabinet for your situation.

Quality construction is the key. Storage cabinets are made out of high quality steel or poly cabinets. There are also double-walled doors as well as sides, tops and bottoms. Also check for leak proof seals. The bottom line is safety. Check for third-party certification like FM Global (FM approved) or Underwriters Laboratories (UL listed).  Proper storage of these harmful chemicals will make your facility safe and secure a great place for you and your staff to work in.